High quality Cisco ICND2 200-105 dumps exam is the industry leader in information technology, Cisco ICND2 200-105 dumps pdf training resources which are the best for clearing 200-105 exam test, and to get certified by Cisco ICND2. https://www.lead4pass.com/200-105.html dumps pdf practice files. Download latest Cisco 200-105 dumps pdf questions and answers at lead4pass, pass 200-105 exam test easily.
Download latest Cisco 200-105 dumps pdf files: https://drive.google.com/open?id=0B_7qiYkH83VRS3BsT2duT3pTSlU
Download latest Cisco 210-260 dumps pdf files: https://drive.google.com/open?id=0B_7qiYkH83VRcnI0SE83bHBvQ1k
It has become necessary to configure an existing serial interface to accept a second Frame Relay virtual circuit. Which of the following are required to solve this? (Choose three) 200-105 pdf
A. configure static frame relay map entries for each subinterface network.
B. remove the ip address from the physical interface
C. create the virtual interfaces with the interface command
D. configure each subinterface with its own IP address
E. disable split horizon to prevent routing loops between the subinterface networks
F. encapsulate the physical interface with multipoint PPP
Correct Answer: BCD
What can be done to secure the virtual terminal interfaces on a router? (Choose two.)
A. Administratively shut down the interface.
B. Physically secure the interface.
C. Create an access list and apply it to the virtual terminal interfaces with the access-group command.
D. Configure a virtual terminal password and login process.
E. Enter an access list and apply it to the virtual terminal interfaces using the access-class command.
Correct Answer: DE
Which statement about QoS default behavior is true?
A. Ports are untrusted by default.
B. VoIP traffic is passed without being tagged.
C. Video traffic is passed with a well-known DSCP value of 46.
D. Packets are classified internally with an environment.
E. Packets that arrive with a tag are untagged at the edge of an administrative domain.
Correct Answer: E
A sporting goods manufacturer has decided to network three (3) locations to improve efficiency in inventory control. The routers have been named to reflect the location: Boston, Frankfurt, and Lancaster.
The necessary networking has been completed at each location, and the routers have been configured with single area OSPF as the routing protocol. The Boston router was recently installed but connectivity is not complete because of incomplete routing tables. 200-105 dumps
Identify and correct any problem you see in the configuration.
Note: The OSPF process must be configured to allow interfaces in specific subnets to participate in the routing process.
Correct Answer: The question mentioned Boston router was not configured correctly or incomplete so we should check this router first. Click on Host B to access the command line interface (CLI) of Boston router.
Which component of the Cisco SDN solution serves as the centralized management system?
A. Cisco OpenDaylight
B. Cisco ACI
C. Cisco APIC
D. Cisco IWAN
Correct Answer: B
What is a difference between TACACS+ and RADIUS in AAA?
A. Only TACACS+ allows for separate authentication.
B. Only RADIUS encrypts the entire access-request packet.
C. Only RADIUS uses TCP.
D. Only TACACS+ couples authentication and authorization.
Correct Answer: A
A network administrator is troubleshooting an EIGRP problem on a router and needs to confirm the IP addresses of the devices with which the router has established adjacency. 200-105 pdf The retransmit interval and the queue counts for the adjacent routers also need to be checked. What command will display the required information?
A. Router# show ip eigrp adjacency
B. Router# show ip eigrp topology
C. Router#show ip eigrp interfaces
D. Router#show ip eigrp neighbors
Correct Answer: D
Which IEEE standard does PVST+ use to tunnel information?
B. 802 1q
Correct Answer: B
Which EIGRP for IPv6 command can you enter to view the link-local addresses of the neighbors of a device?
A. show ipv6 eigrp 20 interfaces
B. show ipv6 route eigrp
C. show ipv6 eigrp neighbors
D. show ip eigrp traffic
Correct Answer: C
In which three ways does the RADIUS protocol differ from TACACS? (Choose three.) 200-105 dumps
A. RADIUS uses UDP to communicate with the NAS.
B. RADIUS encrypts only the password field in an authentication packet.
C. RADIUS authenticates and authorizes simultaneously, causing fewer packets to be transmitted.
D. RADIUS uses TCP to communicate with the NAS.
E. RADIUS can encrypt the entire packet that is sent to the NAS.
F. RADIUS supports per-command authorization.
Correct Answer: ABC
Read more: https://www.lead4pass.com/200-105.html dumps exam questions and answers.
Watch the video to learn more: