Cisco 642-356 Certification, Provides Best Cisco 642-356 Study Material With 100% Pass Rate

Welcome to download the newest Pass4itsure SY0-401 dumps:

Flydumps guarantee your Cisco 642-356 exam success with our Exam Resources. Cisco 642-356 exam are the latest and developed by experience’s IT certification Professionals working in today’s prospering companies and data centers.All our Cisco 642-356 exam dumps including Cisco 642-356 exam questions which guarantee you can 100% success Cisco 642-356 exam in your first try exam.

QUESTION 62
What two commands must be executed on an MDS 9000 family switch in order to change a dynamically assigned Domain ID 5 to a static Domain ID 10 for VSAN 10? Choose two.
A. switch(config-if)# shut fcdomain 5
B. switch(config-if)# no shut fcdomain 10
C. switch(config)# fcdomain domain 10
D. switch(config)# fcdomain domain 10 static vsan 10
E. switch(config)# fcdomain restart vsan 10
F. switch(config)# fcdomain restart disruptive vsan 10

Correct Answer: DF Section: (none) Explanation
Explanation/Reference:
QUESTION 63
Which two of these logging statements are true? (Choose two.)
A. Call Home message level 0 is most urgent and level 7 is least urgent, whereas the syslog level 9 is most urgent and level 0 is least urgent.
B. Syslog message level 0 is most urgent and level 7 is least urgent, whereas the Call Home message level 9 is most urgent and level 0 is least urgent.
C. Syslog message level 7 is most urgent and level 0 is least urgent, whereas the Call Home message level 9 is most urgent and level 0 is least urgent.
D. Accounting logs can be stored locally and sent to remote AAA servers.
E. Go to logs > syslog > setup in Device Manager to view the local accounting log.

Correct Answer: BD Section: (none) Explanation
Explanation/Reference:
QUESTION 64
You have been asked to configure a port on your Cisco MDS switch so that a host can join your fabric. Which of these switch port types should the port be set to?
A. N_Port
B. NL_Port
C. F_Port
D. E_Port
E. TE_Port
F. SD_Port

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 65
While examining the output of a show run command on the Cisco MDS 9000 Series, you notice that the statement interface GigabitEthernet2/1.2 appears in the output. What does this mean?
A. It refers to the second FCIP tunnel that is configured on port GigabitEthernet2/1.
B. It refers to a VLAN subinterface on port GigabitEthernet2/1.
C. It means that port GigabitEthernet2/1 is assigned to VSAN 2.
D. It is a mistake in the interface configuration.

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 66
You are implementing an FCIP solution for SAN extension between two data centers using the Cisco MDS 9000 Series platform. For redundancy, there are two Metro Ethernet paths between the data centers. How can you specify primary and secondary paths for each FCIP tunnel?
A. Configure OSPF routing on the IPS-8.
B. Configure EIGRP routing on the IPS-8.
C. Configure FSPF link costs on the MDS switch.
D. Configure QoS on the MDS switch.

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 67
On a Class C IP network, how many bits in the IPv4 address are used to identify the network?
A. 8
B. 16
C. 24
D. 32

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 68
After performing the initial switch configuration by running the setup utility, an administrator notices that ports configured to connect to other Cisco MDS 9000 switches invariably come up as E_Ports rather than TE_Ports. Which error was made at initial configuration?
A. VSAN capabilities were not enabled.
B. Default switchport trunk mode was set to auto.
C. Full zoneset distribution was not enabled.
D. Default switchport trunk mode was set to on.

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 69
The MDS 9000 family switches use what three technologies to protect against unauthorized management access? (Choose three.)
A. SNMPv3
B. SSH
C. RBAC
D. RMON
E. SES
F. WEBM

Correct Answer: ABC Section: (none) Explanation
Explanation/Reference:
QUESTION 70
During initial switch configuration, the administrator elects to enable full zoneset distribution. What is the impact of this choice during zoneset activation?
A. only the active zoneset is distributed to all switches in the fabric
B. both the full zone database and active zoneset are distributed to all switches in the fabric
C. both FCID and WWN information are distributed to all switches in the fabric
D. only the full zone database is distributed to all switches in the fabric

Correct Answer: B Section: (none) Explanation
Explanation/Reference:

The Cisco 642-356 study materials tend to be unequalled in high-quality and they are 100% certain to make you go ones exam questions. You are not about to purchase a disposable product at Killtest. Regardless of how soon you decide to take the actual Cisco 642-356 certification examination, you will be able to walk into the testing room as confident as the Certification Administrator.  Pass4itSure Cisco 642-356 study materials provide you everything you will need to take Cisco 642-356 examination. Whether or not you decide to make use of each of our Cisco 642-356 study materials or even the Cisco 642-356 practice exam it is possible to feel comfortable knowing that you could have the ultimate throughout offline and online instruction.

Welcome to download the newest Pass4itsure SY0-401 dumps: https://www.pass4itsure.com/sy0-401.html

HP HP2-T31 Demo Download, Buy Best HP HP2-T31 Exams For Download