Cisco 640-816 Certificate,Buy Best Cisco 640-816 Certification Braindumps Sale

The Newest VCE and PDF! As we know,only valid and newest Cisco 640-816 Flydumps vce can help you a lot in passing the exam. Just try Flydumps Cisco 640-816 latest vce and pdf, which are authenticated by expert and covering every aspect of Cisco 640-816 exam.100% money back guarantee!

QUESTION 75
Refer to the output from the show running-config command in the exhibit. What should the administrator do to allow the workstations connected to the FastEthernet 0/0 interface to obtain an IP address?
Build Your Dreams PassGuide 640-816

A. Apply access-group 14 to interface FastEthernet 0/0.
B. Add access-list 14 permit any any to the access list configuration.
C. Configure the IP address of the FastEtherent 0/0 interface to 10.90.201.1.
D. Add an interface description to the FastEthernet 0/0 interface configuration.

Correct Answer: C QUESTION 76
Refer to the exhibit. Switch1 has just been restarted and has passed the POST routine. Host A sends its initial frame to Host C. What is the first thing the switch will do as regards populating the switching table?
Build Your Dreams PassGuide 640-816

A. Switch1 will add 192.168.23.4 to the switching table.
B. Switch1 will add 192.168.23.12 to the switching table.
C. Switch1 will add 000A.8A47.E612 to the switching table.
D. Switch1 will add 000B.DB95.2EE9 to the switching table.

Correct Answer: C
QUESTION 77
Refer to the exhibit. Workstation A must be able to telnet to switch SW-A through router RTA for management purposes. What must be configured for this connection to be successful?

A. VLAN 1 on RTA
B. default gateway on SW-A
C. IP routing on SW-A
D. cross-over cable connecting SW-A and RTA

Correct Answer: B
QUESTION 78
Refer to the exhibit. The router has been configured with these commands: hostname Gateway interface FastEthernet 0/0 ip address 198.133.219.14 255.255.255.248 no shutdown interface FastEthernet 0/1
Build Your Dreams PassGuide 640-816
ip address 192.168.10.254 255.255.255.0 no shutdown interface Serial 0/0 ip address 64.100.0.2 255.255.255.252 no shutdown ip route 0.0.0.0 0.0.0.0 64.100.0.1 What are the two results of this configuration? (Choose two.)

A. The default route should have a next hop address of 64.100.0.3.
B. Hosts on the LAN that is connected to FastEthernet 0/1 are using public IP addressing.
C. The address of the subnet segment with the WWW server will support seven more servers.
D. The addressing scheme allows users on the Internet to access the WWW server.
E. Hosts on the LAN that is connected to FastEthernet 0/1 will not be able to access the Internet without address translation.

Correct Answer: DE
QUESTION 79
What is the purpose of the command shown below? vtp password Fl0r1da
A. It is used to validate the sources of VTP advertisements sent between switches.
B. It is used to access the VTP server to make changes to the VTP configuration.
C. It allows two VTP servers to exist in the same domain, each configured with different passwords.
D. It is the password required when promoting a switch from VTP client mode to VTP server mode.
E. It is used to prevent a switch newly added to the network from sending incorrect VLAN Build Your Dreams PassGuide 640-816 information to the other switches in the domain.
Correct Answer: A
QUESTION 80
What is the purpose of the OSPF router ID in a DR/BDR election?
A. It is used with the OSPF priority values to determine which OSPF router will become the DR or BDR in a point-to-point network.
B. It is used with the OSPF priority values to determine which interface will be used to form a neighbor relationship with another OSPF router.
C. It is used with the OSPF priority values to determine which router will become the DR or BDR in a multiaccess network.
D. It is used to determine which interfaces will send Hello packets to neighboring OSPF routers.
Correct Answer: C QUESTION 81
Based on the topology table that is shown in the exhibit and assuming that variance is not configured for EIGRP, which route or routes should appear in the routing table?

A. D 192.168.8.20 (2707456/2195456), Serial0/1
B. D 192.168.2.0/24 [90/2707456] via 192.168.8.22, 00:27:50, Serial0/0 [90/3815424] via 192.168.8.18, 00:27:50, Serial0/2
C. D 192.168.2.0/24 [90/3815424] via 192.168.8.18, 00:27:50, Serial0/2
D. D 192.168.8.24/30 [90/2681856] via 192.168.8.22, 00:27:50, Serial0/0 Build Your Dreams PassGuide 640-816

Correct Answer: D
QUESTION 82
A network administrator wants to ensure that only the server can connect to port Fa0/1 on a Catalyst switch. The server is plugged into the switch Fa0/1 port and the network administrator is about to bring the server online. What can the administrator do to ensure that only the MAC address of the server is allowed by switch port Fa0/1? (Choose two.)
A. Configure port Fa0/1 to accept connections only from the static IP address of the server.
B. Employ a proprietary connector type on Fa0/1 that is incompatible with other host connectors.
C. Configure the MAC address of the server as a static entry associated with port Fa0/1.
D. Bind the IP address of the server to its MAC address on the switch to prevent other hosts from spoofing the server IP address.
E. Configure port security on Fa0/1 to reject traffic with a source MAC address other than that of the server.
F. Configure an access list on the switch to deny server traffic from entering any port other than Fa0/1.
Correct Answer: CE
QUESTION 83
Refer to the graphic. How many collision domains are shown?

A. one
B. two
C. three
D. four
E. six
F. fourteen

Correct Answer: B
QUESTION 84
What can be determined from the router output shown in the graphic?
Build Your Dreams PassGuide 640-816

A. 200.1.1.64 is a default route.
B. The output shows that there are three default routes.
C. The output came from router R2.
D. The output came from a router that has four physical interfaces.
E. EIGRP is in use in this network.

Correct Answer: E QUESTION 85
Refer to the exhibit. How should the FastEthernet0/1 ports on the 2950 model switches that are shown in the exhibit be configured to allow connectivity between all devices?
Build Your Dreams PassGuide 640-816

A. The ports only need to be connected by a crossover cable.
B. SwitchX(config)# interface fastethernet 0/1 SwitchX(config-if)# switchport mode trunk
C. SwitchX(config)# interface fastethernet 0/1 SwitchX(config-if)# switchport mode access SwitchX(config-if)# switchport access vlan 1
D. SwitchX(config)# interface fastethernet 0/1 SwitchX(config-if)# switchport mode trunk SwitchX(config-if)# switchport trunk vlan 1 SwitchX(config-if)# switchport trunk vlan 10 SwitchX(config-if)# switchport trunk vlan 20

Correct Answer: B

Flydumps is ready to provide Cisco 640-816 candidates with Cisco 640-816 training materials which can be very much helpful for getting Cisco 640-816 certification, which means that candidates.Cisco 640-816 can easily get access to the services of Cisco 640-816 for practice exam,which will assure them 100% Cisco 640-816 success rate.Though Cisco 640-816 tests are not easy at all, but they do not make Cisco 640-816 things complicated.